The filter is installed at the suction port of the oil pump to protect it and other hydraulic components from pollution impurities,to improve the cleanliness of the hydraulic system.The filter can be directly installed on the top,side or bottom of the tank,filter cylinder immersed in the tank below the liquid level,while filter head exposed outside the tank,and it’s equipped with self-sealing valve,by-pass valve,filter pollution blocking transmitter and other devices,so that when replacing or cleaning filter element,the oil in the tank will not flow out.Our products are novel in design,easy to install,large oil capacity,small resistance,easy to use and maintenance.
| Model | nominal flow rate (L/min) | drift diameter (mm) | filtration accuracy (μm) |
| TF-25xL-C/Y | 25 | 15 | 80
100 180 |
| TF-40xL-C/Y | 40 | 20 | |
| TF-63×L-C/Y | 63 | 25 | |
| TF-100×L-C/Y | 100 | 32 | |
| TF-160×L-C/Y | 160 | 40 | |
| TF-250×F-C/Y | 250 | 50 | |
| TF-400×F-C/Y | 400 | 65 | |
| TF-630×F-C/Y | 630 | 90 | |
| TF-800×F-C/Y | 800 | ||
| TF-1000×F-C/Y | 1000 | ||
| TF-1300×F-C/Y | 1300 |
