NEWS

Tips On Cleaning Hydraulic Oil System Parts

Release Time: 2024-04-16
Read: 26
Share:

After we install the hydraulic system accessories, we must cycle and clean the pipes and flow channels during the test work. Cleaning accessories is an important task to reduce hydraulic oil system failures. Newly installed equipment must be cleaned. Hydraulic oil equipment that uses movement for a certain period of time must also be cleaned regularly, because after long-term operation of the hydraulic oil device, filtered impurities and pollutants will affect the normal operation of the system.

 

If the hydraulic oil system needs to be cleaned, the surrounding environment and site where the equipment is located must first be cleaned. Then in the first stage of cleaning, we need to use low-viscosity special cleaning oil or hydraulic oil of the same brand and model in the same system.

 

During the cleaning process, tap the pipe gently to remove scale, rust and dust. During the cleaning process, constantly observe the clogging of the filter. If the filter sends a signal, replace the filter element in time. The replaced paper filter element, chemical fiber filter element and powder metallurgy filter element must not be used again.

 

If it is a more complex hydraulic oil system, it can be cleaned separately according to the working area. After cleaning, drain the cleaning oil. After confirming that the cleaning oil is drained, the guessing game is completely cleaned.

If you don’t understand the cleaning steps, you can follow the instructions in the manual to clean. If you still have any questions you don’t understand, you can send us a message and we will provide you with exclusive help.